- Capacity: 110 thumb inserts or solids
- Dimensions: 20" x 26.5" x 3.5"
-
Compliment the Finger Insert Storage System with a Thumb Storage System. Inventory will be a breeze. This system is designed to hold all 18 sizes of thumb inserts, one style. Also can be used to store thumb solids. -
This system is designed to hold two different styles or colors in all 19 sizes; 19/32 – 29/32- Capacity: 400 inserts
- Dimensions: 26.5" x 23.625" x 3"
- Quad Storage System also available and holds 2 colors in 15 sizes; 17/32 – ¾; Capacity: 300 inserts
-
Turbo offers Drilling Spec Sheets and Wax Layout Pencils. Keep spec pads handy to record important ball layout and drilling information. Xtreme Dealers receive a complimentary pad (100 sheets) and supply of wax pencils; 1x annually. Available with direct orders only. Additional pads and pencils (3) can be purchased for $5/set. While Supplies Last. -
Made from the purest industrial chemicals which ensures a longer shelf life and stronger bond, Slo-zip has a slower set or cure time and is recommended for the installation of Switch Grip® Interchangeable Insert Assemblies. Each 1 oz. bottle includes an extended tip to help dispense adhesive properly. Make sure you get full-use of your adhesive by adding Turbo Flexi Tips which fit over the top of Zip-45 extended tip and helps prevent clogging, messy dripping and over use. 24 replacement tips included in each bag. -
A staple in any pro shop regardless of experience. The Pro-Sect® features an easy-to-read ruler designed in 1/16" increments for precise layout and an integrated 180-degree protractor to help indicate degree of angle for oval hole cuts and oval insert installation. A single piece, injected molded construction and intersected design makes The Pro Sect® the most durable and accurate layout tool for straight and perpendicular lines. Professionals can download our Motion Enhancement Guide which outlines many Dual Angle Motion Enhancement Layouts. Mass Bias bowling balls and balls with a strong preferred spin axis can be fine-tuned for specific movement with proper alignment shift and balance hole placement. The Pro Sect® is just the tool to help with more advanced layouts. Colors May Vary. -
- Axis point locator
- Match track line on bowling ball to the lines laid out on Armadillo to locate bowler’s PAP
-
- Slide rule with pencil guide locks into position for exact span measurement
- Easy to use
- Advanced design for precise measurement
-
Each Insert Remover Tool is precision machined on 3 sides of blade so that inserts can be removed without being destroyed and is hardened for strength & durability. The torque bar at top makes grip removal a snap. Includes 1 year warranty replacement. 3 sizes available (7/8”, 31/32”, 1-1/32”) or 3 piece set. -
This handy little tool is used to remove dust and loose particles from the bottom of finger and thumb holes. It easily fits over the end of most power vacuum hoses. The extended tube measures 5 1/2" length and 1/2" in diameter. Get to the bottom of your dust troubles with the Turbo-Vac. -
For shops doing a high volume of Switch Grip™ installation, the Reamer End Mill has 8 cutting edges ensuring optimum drill and fit for easy Outer Sleeve installation. Because of the deeper drill depth of the Outer Sleeve and the dense core materials/designs used in many high tech bowling balls, a traditional 1 ½” drill may drift off center, more so toward the bottom of hole. This off center cut will make the Outer Sleeve more difficult to fit properly at bottom because it is tight. Keep in mind the Outer Sleeve is designed to be a press fit and should never be forced into position. If the Outer Sleeve is forced into hole, the Inner Sleeve will not fit properly and be very difficult to insert and remove. The Reamer End Mill ensures a better fit from top to bottom of hole. Available: 1 1/2" Straight Shank with Auto Stopper. -
All Straight shank drills are certified and tested to the specifications of Turbo brand insert products to assure you never have an installation problem. All of our drills are inspected with a tolerance of +.001/-.003. Sizes Available: 7/8”, 31/32”, 1 1/8”, 1 1’4”, 1 3/8”. Xtreme Dealers receive FREE 31/32” and 1 ¼” upon initial enrollment in Turbo Xtreme Dealer program. FREE Sharpening and Replacement Services. We want to ensure the best installation of all our insert products which means keeping those edges sharp and within the tolerance of product dimensions. Turbo will sharpen or replace any Turbo certified drill including Switch Grip drills. Simply call a Customer Support Representative at: 800-530-9878 for details. -
Fitting Tools are an indispensable tool to ensure proper fit and desired comfort. All fitting tools are configured with each size insert available/style and can be used to fit fingers from the top or bottom of tool depending on the insert style of interest. All available colors/style are represented in each tool. If your retail location does not stock all colors and would like to customize, please contact us directly regarding color selections. Additional lead time required. Note: Custom display stand sold separately.- Available in: Quad™, Classic, Quad2 and Power-SB
- All sizes & colors available per style are represented
-
Convenient all-purpose utility knife best used to remove and insert traditional bowling tape in thumb holes. -
Made from a quality 5 mil vinyl material, Slick Strips® can be easily inserted into thumb and finger holes to help aid in release. Their smooth, slick feel will give you the confidence you need to perform your best.- 30 pcs per package
- Color: Red
- Available in 3/4” and 1”
-
Put some Drive in Your Performance with our signature Driven to Bowl logo tapes.- Cotton fitting tape - Comparable to Purple (5) fitting tape
- Available in Black
-
Tape Roll Dimensions: 13’ L x 1” W- Stretchable Cotton fabric
- Apply to fingers and thumb to adjust fit of hole, ease grip tension and modify release
- Apply before bowling to prevent blisters, callouses, cuts
-
- Stretchable Nylon-polyester fabric
- Smooth texture
- Use in place of messy powder or liquid skin products
- Apply before bowling to prevent blisters, calluses, cuts
- Available in 13’ L x 1” W rolls, 30 pc pre-cut package and 100 pc pre-cut bulk roll
- Color: Blue
-
- NON-Stretch Nylon-polyester fabric
- Ultra thin with silky smooth texture
- Use in place of messy powder or liquid skin products
- Apply before bowling to prevent blisters, calluses, cuts
- Dims each roll: 13’ L x 2” W
-
Aids in lifting an Inner Sleeve insert up and out of a tight thumb hole. Removable inserts can become difficult to remove when a ball core expands due to hot/cold climate changes or simply over time as the ball absorbs lane oil. Ball core expansion puts pressure on the Switch Grip Outer Sleeve which causes difficulty in removing or turning the Inner Sleeve. The Jack aids in removing Inner Sleeves that tighten up in ball. Colors may vary. -
2 sizes Available: Large (Thumb-shown at left in red) and Small (Fingers or Small Thumb sizes shown at right in blue). Colors may vary. Switch A Roo Locking Tools can be used to remove Inner Sleeves that become tight due to climate changes (expanding ball cores), loose debris that can get down into hole and under locking channel or for other uncontrollable factors. Simply insert the cone-shaped rubber end into insert hole, twist and remove. Colors may vary. -
If you frequently suffer from fit or release problems related to finger swelling, then Switch Grip® Interchangeable Finger Assemblies are right for you. Switch Grip® Finger Assemblies use the same technology and locking mechanism as our popular Thumb Assemblies which consists of an Outer Sleeve and removable Inner Sleeve. Outer Sleeve - o.d. 1 1/8”. Inner Sleeve - i.d 31/32”. Inner Sleeve can be equipped with finger inserts 31/32” o.d. which include Turbo insert sizes 19/32 – 13/16”. -
Unlike the smooth, quick release of our Urethane solids, Xcel thumb sleeves have a grainy texture when finished and aid in slowing release or gaining grip. This product is often recommended for bowlers with very dry skin. For retail convenience, the soft, vinyl blend of material makes Xcel Thumb Inserts easy to drill and cut without the use of a router or plug cutter. Hardness: 47 (+/- 3) Shore D Available Styles: Round, no taper; Oval, no taper Available Colors: Black Sizes: 18 sizes, 51/64” – 1 1/16” -
- 100% urethane, quick release, consistent feel
- Pre-sanded outside surface
- Hardness 72 (+/- 2) Shore D
-
We can transform any high resolution digital art into an embroidery design to enhance the image of your business. Turbo offers custom embroidery service right in-house. Quick and convenient, with a wide selection of colors to choose from, we can add your custom logo, backname signature, initials etc. to most any sportswear product with only a few days turnaround. Digitizing services are also available.For more information on our custom embroidery services, please contact us directly at: 800-530-9878
-
BIGGER 1 3/4” diameter. 2X MORE sanding channels for more consistent surface contact. 120 Grit. -
Not for the faint of heart. This heavy duty cutter has a 2″ Carbid cutting surface. Its unique domed construction allows you to cut safely and easily. This is a must have for any pro shop! Straight shank only. -
Make sure you get full-use of your adhesive by adding Turbo Flexi-Tips which fit over the top of Zip-45 extended tip and helps prevent clogging, messy dripping and over use. 24 replacement tips included in each bag. -
Recommended for the installation of all finger inserts, Urethane Thumb Solids or Xcel (Vinyl) Thumb Inserts. Zip Plus-45 is an industrial compound adhesive which ensures exceptional bond and longer shelf life. Each 1 oz. bottle includes an extended tip to help dispense adhesive properly into holes. Make sure you get full-use of your adhesive by adding Turbo Flexi-Tips which fit over the top of Zip-45 extended tip and helps prevent clogging, messy dripping and over use. 24 replacement tips included in each bag. -
Available in: 19 sizes, 9 colors, Standard 31/32” diameter for sizes 19/31 - 13/16, 1 1/32” diameter for sizes 53/64 - 29/32. Side 1: Perfect Oval – is designed as a true, milled oval shape. This oval shape is flat through the center and is the most like the shape of your fingertip giving you a very natural and relaxed fit. Side 2: Power Lift 1/4” – helps increase loft and length of release to the target. The finger pad has a flat edge and smooth surface for a sharp, clean feel.
-
Available in: 19 sizes, 2 colors, Standard 31/32” diameter for sizes 19/31 – 13/16, 1 1/32” diameter for sizes 53/64 – 29/32. Side 1: Power Nub – Lined with rows of small, raised bumps, the Power Nub has a very sharp feel and is not for the faint of grip! This style is recommended for a strong grip. Side 2: Semi-Super Bump or Relaxed Finger Tip – has a smooth, rounded bump close to the front edge. When properly fit, the bump rests under the first knuckle of the finger. It is designed for a more relaxed grip and ideal for bowlers who suffer from arthritis or have weak grip pressure.
-
QUAD® (Q) - Available in: 19 sizes, 9 colors, Standard 31/32” diameter for sizes 19/31 - 13/16, 1 1/32” diameter for sizes 53/64 - 29/32. Ms. QUAD® (MQ) - 7/8" diameter, Available in 15 sizes, *5 colors.Side 1: Perfect Oval – Milled Oval with Smooth or Mesh Surface – designed as a true, milled oval shape. This oval shape is flat through the center and is the most like the shape of your fingertip giving you a very natural and relaxed fit. Use mesh textured surface for a tackier feel. Side 2: Power Oval – has 1/8″ forward pitch for more subtle increase in loft. The finger pad has a contoured shape and smooth surface. Ideal for most bowlers.
-
Available in: 19 sizes, 2 colors, Standard 31/32” diameter for sizes 19/31 - 13/16, 1 1/32” diameter for sizes 53/64 - 29/32. Side 1: Power Lift 1/4” – helps increase loft and length of release to the target. The finger pad has a flat edge and smooth surface for a sharp, clean feel. Side 2: Semi-Super Bump or Relaxed Finger Tip – has a smooth, rounded bump close to the front edge. When properly fit, the bump rests under the first knuckle of the finger. It is designed for a more relaxed grip and ideal for bowlers who suffer from arthritis or have weak grip pressure.
